Lorex Stratus Connectivity allows you to view your cameras on your mobile phone using a simple 3 step setup process. Simply download the app, scan the QR code on the top of your DVR and enter the. Lorex ECO Stratus App: Installation and setup for Android To log in to your Lorex ECO Stratus app, you must locate your ECO Series DVR device ID located under a QR Code sticker on your DVR. TIP: If you cannot locate your Device ID, you can connect using a Dynamic Domain Name System (DDNS) address, or local IP address.
Lorex ECO Stratus Client software for PC / Mac allows remote access to ECO Series DVR systems.
Prerequisites:
Launch the Lorex ECO Stratus Client software on your computer to open the User login window.
In the Login Type drop-down menu, select the Device ID or IP / Domain, and then enter your device ID or IP address.
REMINDER: If you are not able to connect to your DVR using the device ID on the same network, you may be experiencing a NAT Loopback issue. Routers recognize and connect to devices via IP address. To connect your system from the same network, use the IP address of the DVR.
Enter the User Name. Refer to your user manual for your default username if necessary.
Enter the Password. Refer to your user manual for your default password if necessary.
Enter the Client Port value (default: 9000).
In the Bitrate drop-down menu, select Substream or Mainstream.
REMINDER: Substream displays camera feeds using a lower resolution than mainstream.
Click Login to open the Live View window.
Lorex ECO Stratus Client Software Window Options:
To log in to your Lorex ECO Stratus app, you must locate your ECO Series DVRdevice ID located under a QR Code sticker on your DVR.
TIP: If you cannot locate your Device ID, you can connect using a Dynamic Domain Name System (DDNS) address, or local IP address.
The following instructions require you to access your system using the Lorex ECO Stratus app on your smartphone or tablet.
Prerequisite:
To set up the Lorex ECO Stratus app:
Launch the Lorex ECO Stratus app on your Android smartphone or tablet.
Tap Device Manager, then tap Add.
Enter the following information:
Device Name: Enter a name of your choice to identify the DVR.
Login Type: Select IP / Domain or Device ID.
TIP: If your system supports device ID connection, scan the QR code with the number on top of your DVR, or manually enter the device ID printed on the label. If your system does not support QR scanning, use your IP address or DDNS instead.
Client Port: Enter the Client Port value for the DVR (default: 9000).
User Name: Enter the User Name. Refer to your user manual for your default User Name.
Password: Enter the Password. Refer to your user manual for your default Password.
IMPORTANT: If this is the first time you are logging in you will be prompted to change your DVR password. Enter a new 6 character or digit password and tap Done.
Tap Save.
LIMITATION: A maximum of 3 DVRs can be remotely connected at once.
댓글 영역